COBALT T-SLOT CUTTERS ICS USA SPECIAL PURPOSE STAGGERED TEETH WELDON SHANK RIGHT HAND CUT RIGHT/LEFT HAND HELIX Cobalt T-Slot Cutters are designed for milling T-slots into tougher materials where a good surface fi nish is required. They are used for machining hard, high strength materials up to a hardness of 40RC. It allows for increased speeds and feeds because of greater hardness, though it still falls far short of the speed, feed, and durability advantages of carbide. Carbide: Carbide tools can be run at speeds 2 to 2.5 times faster than HSS tools and HSS-Cobalt and thereby provide the opportunity for substantially improving production output. 800.255.1701 Drills 88 800.255.1701 High Speed Steel & Cobalt Drills Speed and Feed Recommendations NOTE: The speeds and feeds shown are suggested starting points only and may be increased or decreased. The cutting speed and feed rate should be appropriately adjusted according to the actual situation. When the tool life is the priority factor, the cutting speed and feed rate can be appropriately reduced; when the chip leaving the edge is not well, the cutting speed can be appropriately increased. Cobalt Base Stellite, HS-21, HAYNES25/188, x-40, L-605. SFM = 0.8 X Highest Speed Range. Feed should be 0.5 X Suggested Value. Profiling Cutting Depth.

Product Description

ID: 227064

Precise Cobalt E22-CO T-Slot Milling Cutter, 1-1/2” T-Slot Size - 10-315-196

• For milling T-slots in the tables and beds of machine tools and similar applications.
• A vertical slot must be cut first, so that the neck and shank can enter the cut.
• Tool Material: Cobalt
• Shank Style: Straight Shank
• Helix Direction: Right And Left Hand Helix
• Tooth Pattern: Alternate Side Cutting Teeth

Cobalt T Slot Cutter Speeds And Feeds Free

For More Precise T-Slot Milling Cutters Click Here

Cobalt T Slot Cutter Speeds And Feeds Speeds